ADA-28364 Downhole Drilling Tools bearing

N1:16 mm; A5:17.4 mm; N:19mm; d1:37.4 mm; B:34.8 mm; A1:12 mm; B1:44.3 mm; Weight:0.85 kg; H1:76 mm; T min.:-20 °C;

H2:114 mm; Recommended tightening torque for set screw:8 Nm; N:14mm; T max.:200 °C; C:35.1 kN; A1:36 mm; d:47.62 mm; C0:23.2 kN; s1:21.75 mm; B:43.5 mm;

Precision Class:ABEC 1 | ISO P0; Manufacturer Name:NTN; Min operating temperature, Tmin:-20 °C; Enclosure:Open; D:72 mm; Noun:Bearing; Weight / Kilogram:0.267; d:35 mm; Minimum Buy Quantity:N/A;

C0:15.2 kN; L:166 mm; B1:38.9 mm; J:129 mm; Dz:80 mm; B:25.4 mm; H:46.2 mm; Designation of open end cover:SCOE207-35; Designation of housing:PLE207N-; A:44.5 mm;

Characteristic cage frequency, FTF:0.42 Hz; Y2:3.11; Nlim:2,800 rpm; Fatigue limit load, Cu:72.4 kN; b:11 mm; k:5 mm; Brand:SNR; Da max:203 mm; Number of lubrication holes:3; da min:132 mm;

A:55 mm; A1:36 mm; d:50 mm; Weight:2.5 kg; H2:114 mm; C:35.1 kN; L:214 mm; B:51.6 mm; s1:25.8 mm; T max.:100 °C;

Expansion Type:Non-Expansion; Bearing Series:206 Series; Max Bearing Speed:6500 rpm; Flinger Material:None; Manufacturing Plant Location:Rogersville, TN; Bearing Inner Ring Material:Steel; Housing Type:Narrow Slot Take-Up; Retainer Type:Std Retainer; Seal Type:Single Lip; Bearing Duty:Intermediate D

Designation of bearing:UC211G2; A1:18 mm; d:55 mm; N:19mm; T max.:100 °C; T min.:-20 °C; C0:29.2 kN; J:130 mm; L:162 mm; Designation of housing:F211-;

Mass:0.02 kg; Da max:22 mm; Min operating temperature, Tmin:-20 °C; rs min:0.6 mm; B:8 mm; f0:12.4; da min:13 mm; Nlim (grease):30,000 rpm; Radial clearance class:CN; Dynamic load, C:4.55 kN;

Maximum tightening torque:14 Nm; Characteristic cage frequency, FTF:0.44 Hz; Radial clearance class:CN; n:4 mm; Lw:6.3 mm; Manufacturer Name:NTN; Category:Bearings; Precision class:P0; B2:23 mm; Characteristic rolling element frequency, BSF:8.89 Hz;

C0:7.88 kN; Weight:0.61 kg; A1:11 mm; L:70 mm; Designation of housing:FLE205N-; Designation of bearing:US205G2; Designation of closed end cover:SCC205; s1:13.5 mm; T max.:100 °C; T min.:-20 °C;

L:97 mm; N1:16 mm; L1:62 mm; T max.:200 °C; A2:24 mm; C:14 kN; Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:US205-15G2T20; SW:3.18 mm; B:27 mm;

B:34 mm; S:14.3 mm; A:36 mm; A1:21 mm; d:25 mm; J:50.8 mm; Designation of bearing:UC205G2T04; L:70 mm; E:12.5 mm; L1:21 mm;

A:32.1 mm; A1:12 mm; H:142 mm; G:R1/8"; C:19.5 kN; Weight:0.84 kg; L:80 mm; S:15.9 mm; B:38.1 mm; A2:41.2 mm;

Nref:22,000 rpm; Da max:28 mm; Static load, C0:3.1 kN; Dynamic load, C:6.8 kN; D1:27.9 mm; Radial clearance class:C3; da min:16 mm; da max:18.3 mm; B:10 mm; f0:12.2;